What if client wants a wallmount dimmer for a 0-10V dimmable light?

[Dimerize]

Folks, client has a bathroom with three lights: Mirror, Ceiling, and Shower. Ceiling and Shower have ELV drivers reverse-phase; but the Mirror is a 0-10V dimmable tube. Client wants all three dimmers at the entrance of the bathroom.

We will use RRD-6NA for the Ceiling and Shower, but for the Mirror the only possibility for us to use a third (aesthetically similar) dimmer is to install a GRX-TVI somewhere and pair it with a RRD-10ND. Well, that's over-killing in my opinion, the GRX-TVI is a powerful dimming module, we can't justify it just for one fixture. Any other options you all may think of? I thought of ganging a wall-mount Pico to control a LMJ-5T-DV-B, but the Pico looks different aesthetically than the Maestro®... Thank you in advance for your help.

[Mike S.]

Your only other option would be to remotely mount a LMJ-5T-DV-B, if you have Inclusive software. Then you could have a keypad control the dimmer and the LMJ unit together. If this is not an option then using the RRD-10ND and a GRX-TVI would be the only option.

[Dimerize]

Your only other option would be to remotely mount a LMJ-5T-DV-B, if you have Inclusive software. Then you could have a keypad control the dimmer and the LMJ unit together. If this is not an option then using the RRD-10ND and a GRX-TVI would be the only option.

Thank you for the tip Mike S. You rock.