Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Security system integration questions

  1. #1
    Senior Member
    Join Date
    Jul 2014
    Posts
    120

    Security system integration questions

    I'm trying to set up my system so it works the same with my Concord4 alarm system as the Honeywell system would that "natively" integrates. So I'm programming the repeater phantom buttons as follows:

    100 (Emergency) - all shades full open, most interior lights 25%, Single/Multi-room scene
    99 (Interior Full) - all shades full open, most interior lights 100%, Single/Multi-room scene
    98 (Exterior Flash) - all exterior lights 100%, Single/Multi-room scene

    How does the Flash work? I don't see any way to set that up in the RRA2 programming. Or is that something that the Honeywell system does on it's own (toggles button 98)?

    Since the Concord system doesn't "speak" Lutron, I'll be using my Home Automation system (Indigo) to trigger on events from the security system and send the appropriate commands to the Lutron repeater.

    Any other pointers on alarm system integration would be appreciated.

  2. #2
    Senior Member
    Join Date
    Jul 2014
    Posts
    120
    Nevermind on the flashing lights question. I figured that one out, the button type needs to be Security Mode.

    What's the best way to release Security Mode? Do it on the alarm system being reset?

  3. #3
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    289
    Security mode will turn off when the contact closure reopens, generally when the alarm system is disabled.

  4. #4
    Senior Member
    Join Date
    Jul 2014
    Posts
    120
    Not using a contact closure. But I can detect when the alarm is reset and send a button release command then.

Similar Threads

  1. Home/Away security integration
    By Jeepdon in forum Design Assistance - RA2
    Replies: 6
    Last Post: 03-11-2021, 11:33 PM
  2. Suggestions on how to integrate a split-system ductless HVAC system with RadioRA2
    By RA2-Designer-Gal in forum Design Assistance - RA2
    Replies: 4
    Last Post: 05-10-2017, 11:43 AM
  3. System Operation/Limitation Questions
    By ekimla in forum Design Assistance - CAS
    Replies: 9
    Last Post: 08-08-2016, 03:34 PM
  4. Questions from a beginner
    By abollmeyer in forum General Discussion - RA2
    Replies: 2
    Last Post: 08-19-2015, 08:01 PM
  5. Questions for QSE-CI-NWK-E programming?
    By Blair S. in forum Programming - Shades
    Replies: 0
    Last Post: 07-05-2013, 06:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •