Results 1 to 4 of 4

Thread: Swapping out a DVF-103P for a Caseta outlet

  1. #1
    Junior Member
    Join Date
    Mar 2016
    Posts
    2

    Swapping out a DVF-103P for a Caseta outlet

    I installed 30+ caseta outlets and pico remotes yesterday. For the most part, everything went flawlessly! I have hit a wall with one set of lights. With the caseta outlet installed, the lights come up, but remain very dim. My electrician couldnt figure it out either but said it has something to do with a ballast.

    The old set up was operated by a Lutron 3 way dimmer, model DVF-103P and worked great. Does anyone know if I could replace this with a Caseta unit?

    I called Lutron but had to drop after being on hold for a long time.

    Thanks!

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    359
    The DVF-103P dimmer is used to control Lutron 3-wire fluorescent ballasts and LED drivers. In order to convert this to a Caseta device, you would need the PD-10NXD dimmer, and also the PHPM-3F-DV-WH 3-wire interface.

    What kind of lights are you trying to control? Are they fluorescent or LED bulbs with a Lutron ballast/driver?

  3. #3
    Junior Member
    Join Date
    Mar 2016
    Posts
    2
    Thanks Brian! Im controlling 9 48 inch fluorescent bulbs. They are part of custom pendants the previous home owner had built. They had from a 20 ft ceiling. Any suggestions where the interface should be installed?

  4. #4
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    359
    If they were working with the DVF-103P, then you would need to use the two model numbers from my previous post.

    Wall dimmer: PD-10NXD-(color)
    Interface: PHPM-3F-DV-WH http://www.lutron.com/TechnicalDocum...ry/369-355.pdf

Similar Threads

  1. On/off switch for standard wall outlet?
    By Ostimu in forum Design Assistance - CAS
    Replies: 4
    Last Post: 01-11-2016, 05:11 PM
  2. Lutron Homeworks 4 Wireless Outlet Receptacles
    By gaspower in forum General Discussion - Legacy HW
    Replies: 2
    Last Post: 06-16-2015, 09:38 AM
  3. Lutron PD-6WCL-WH In Wall Dimmer compatibility with outlet
    By Jaybrones in forum General Discussion - CAS
    Replies: 1
    Last Post: 02-09-2015, 11:29 AM
  4. Wiring dimmer to a two or three pronged outlet?
    By Crometer in forum General Discussion - Controls
    Replies: 1
    Last Post: 08-29-2014, 06:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •