I've just installed a LQSE-4S10-D to use with a motorized security gate (Shade type).
One button makes the gate go down and other the gate goes up.
The problem is that I've never programed this type of module and gate in the past. The hardware is ok, I can open and close the gate manually with the module buttons but I don't know what type of load I have to select in the Lutron Designer software to be able to assign it to the module.
The other problem is that the LQSE-4S10-D module is not in the Lutron Designer equipment option so I don't know which module I have to use instead.
Please give a hand with this.