Thank you for this feedback; we will forward this information to our RadioRa2 development team on a fan-timer feature. Using two keypad buttons, however, you could simulate the functionality of a timer. Please see the steps belowfor a workaround on creating a bath fan timer for RadioRa 2. HomeWorks uses sequences to achieve this functionality. Unfortunately, RA2 does not have this ability. The only drawback is that this method will use two buttons to complete the task.
Process:1. Create a button that will control the bath switch. I called this button "Fan On/Off". Associate it with the switch and make it a toggle. This way the end user can switch the load off if they wish when they exit the room.
Attachment 852. Next, create a button called timer. This is going to be the second button used in this process. This button will execute the timer then will shut the fan off. Make the button type a "Single/Multi room scene". Set the level for the switch to off. This will make the switch turn off when the delay is met. Next you can set up the delay. If you do not see the delay option, right click the "Programmed Item Name" toolbar and select "Show Delay". Set the delay for the time until the load will shut off. In this example, it is set to 20 minutes.
Attachment 86