Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Automatic sequence problem

  1. #1
    Junior Member
    Join Date
    Mar 2016
    Posts
    2

    Automatic sequence problem

    Hi,

    I programmed a timeclock to start a "1 hour heater" sequence every day at 8PM. The sequence is programmed with the following:
    Type: Automatic.
    Tracking: UnChecked.
    Sequence Step 001: Automatically go to next step after 1 hour. Heater switch settings is ON.
    Stop Sequence: Automatically stop sequence after 1 loop. Heater switch settings is OFF.
    The heater is turned ON time but turned OFF after only HALF of the time. Time is showing and ticking correctly from the terminal. There is no other timeclock/scene/sequence/preset etc. concerning that heater. What's seemed to be the problem?
    P.S. - separating the sequence to either timeclocks or scenes ("heater on" and "heater off") seems to be working fine.

    Thanks ahead,
    Segalon.

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    402

Similar Threads

  1. Automatic sequence problem
    By Segalon in forum Programming - HWQS
    Replies: 1
    Last Post: 03-15-2016, 10:00 AM
  2. Sequence Trouble
    By TurnipTruck in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 01-11-2016, 06:37 AM
  3. Programming Automatic reboot on timer
    By Barbara Barrow in forum 3rd-party Integration - HWQS
    Replies: 2
    Last Post: 07-21-2014, 01:54 PM
  4. Automatic sequence issue
    By Ironmike in forum Programming - HWQS
    Replies: 1
    Last Post: 04-28-2014, 02:19 PM
  5. Automatic Off Sequence
    By Kevin P. in forum Programming - HWQS
    Replies: 6
    Last Post: 01-28-2014, 03:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •