Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Correct/easiest way to replace and/or move a device?

  1. #1
    Senior Member
    Join Date
    Oct 2013
    Posts
    518

    Correct/easiest way to replace and/or move a device?

    What's the recommended method for moving a device from one location to another?

    Let me clarify, I have a RRD-3LD in white that needs to be replaced with a black one. Integration already depends on the ID. How do I swap out the white one for a black one and not have to re-do anything depending upon the white one's integration ID?

    Once replaced, the white one would be used elsewhere in the same project.

    Not sure if this is a 'best practices' or 'troubleshooting' kind of question, so moderators feel free to move it.

  2. #2
    Easiest way to swap out device is -
    1. Deactivate it in the software,
    2. Physically replace device with a new one,
    3. Reactive new device in the software in place of old one,
    4. Transfer updated programming.

    All existing programming (and I would expect the integration ID too) will be transferred to the new device.

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    518
    Yes, that would make sense. I didn't see Deactivate as I wasn't poking around with an Activation session in progress. I'll try it and report back.

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    518
    ...which ran afoul of getting the error:
    Quote Quote
    IP multicast failed for repeater with serial number 00xxxxxx. Please check the network connections to this repeater and firewall settings and try again.
    Power cycling resolved that error... onward!

Similar Threads

  1. Correct control/switch for Hi-lume A-Series driver and 1.5A G4 bulbs
    By ingan in forum Lutron Hi-Performance LED Driver - LED
    Replies: 1
    Last Post: 01-19-2016, 02:07 PM
  2. Will the New AppleTV replace the Lutron Caséta Smart Bridge?
    By rodrakic in forum 3rd-party Integration - CAS
    Replies: 1
    Last Post: 10-19-2015, 04:11 PM
  3. Need Help to Find Correct Product and Solution
    By artdecodecor in forum Design Assistance - HWQS
    Replies: 4
    Last Post: 07-29-2015, 02:44 PM
  4. RA1 homeower wanting to replace with RA2 questions
    By terryreid in forum General Discussion - RA2
    Replies: 1
    Last Post: 09-10-2014, 10:04 AM
  5. Sivoia QED - 1 shade does not move, but the rest do.
    By Blair S. in forum Troubleshooting - Legacy QED
    Replies: 0
    Last Post: 07-25-2013, 05:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •