Results 1 to 4 of 4

Thread: Trouble With 6NA replacing in 3-way

  1. #1
    Senior Member
    Join Date
    Sep 2013
    Posts
    415

    Trouble With 6NA replacing in 3-way

    I had trouble putting in a 6NA and RD-RD to replace a 3-way conventional, and I wondered if anyone could help me figure out how to resolve it. There are two lamps with dimmable LEDs connected through Lutron's "receptacle for dimming". Here's a video of the flashing.

    Image of the original switch where power is coming in:
    Click image for larger version. 

Name:	PowerSide.JPG 
Views:	7 
Size:	1.64 MB 
ID:	447
    Image of the original slave switch.
    Click image for larger version. 

Name:	SlaveSide.JPG 
Views:	6 
Size:	745.6 KB 
ID:	448

    I hooked the Lutron modules up with the blue screw to the red wires and got the result you see. I thought I did it wrong and reversed the top two wires and got no power.

    What did I do wrong? Thanks!

  2. #2
    Senior Member
    Join Date
    Sep 2013
    Posts
    415
    Video's link was incorrect: here it is.

  3. #3
    Instructions here: http://www.lutron.com/TechnicalDocum...ry/044-282.pdf

    You want wiring diagram 6.

    You probably have the companion and dimmer switches reversed in location. The 6NA must be at the switch location that feeds the fixture, not at the location connected to the breaker panel. In conventional switches, there's no such thing as master/slave - both switches are identical. Not so for RRA2.

  4. #4
    Senior Member
    Join Date
    Sep 2013
    Posts
    415
    Duh, I should've put the RD-RD first. Thanks!

Similar Threads

  1. Replies: 0
    Last Post: 01-29-2016, 01:16 PM
  2. Replacing older GRX-MR-6
    By joshg in forum General Discussion - RA2
    Replies: 2
    Last Post: 01-18-2016, 06:15 PM
  3. replacing 4-way switch with RD-RD
    By trx250r87 in forum General Discussion - RA2
    Replies: 1
    Last Post: 09-12-2014, 04:36 PM
  4. Removing and replacing a dimmer
    By Connected in forum Programming - RA2
    Replies: 3
    Last Post: 08-09-2014, 05:45 PM
  5. Replacing an MA-600 with an MACL-153M in a 3-way circuit.
    By Brian W. in forum General Discussion - Controls
    Replies: 0
    Last Post: 02-06-2014, 09:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •