Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Maestro Single Pole Fan/Light dimmer Power to the Fixture

  1. #1
    Junior Member
    Join Date
    Feb 2016
    Posts
    1

    Maestro Single Pole Fan/Light dimmer Power to the Fixture

    Trying to install this switch and power is to the fixture. Anyone know of a wiring diagram where i can get this to work on this switch without running another wire? Thanks

  2. #2
    Katie H.
    Guest
    jtaaustin,

    You can find the installation guide for this setup here. This model will only use one wire between the control and the fan/light. I hope this helps.

  3. #3
    Junior Member
    Join Date
    Jun 2016
    Posts
    2
    Hi..i am a new user actually. As per my knowledge you can find the idea to connect the wires from the manual itself. Check the proper specification of it and connect the things accordingly. I don't have the link or suggestion for the diagram but you can go for the link suggested above. Actually it is not tough but also confusing. You you shouldn't go without the proper diagram for this.

Similar Threads

  1. Fan control and dimmer in single gang
    By StevePowers in forum Design Assistance - CAS
    Replies: 3
    Last Post: 11-21-2015, 11:18 AM
  2. Replies: 5
    Last Post: 08-28-2015, 12:42 PM
  3. Switch for CFL Light Fixture
    By Corey in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 06-16-2015, 09:42 AM
  4. Maestro dimmer sensor not functioning with Maestro dimmer
    By TyZee in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 06-03-2015, 01:20 PM
  5. Replies: 1
    Last Post: 06-01-2015, 10:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •