Originally Posted by
21stcenturyElec
I had a quick look and I think you are using the wrong keypad driver, that sounds like the Homeworks version not the Homeworks QS version (keypad_qs_lutron.c4i)
If you use the C4 Agent to set a big scene, quick way to duplicate the Lutron one is turn all lutron loads off then operate the Lutron Scene, then go to the Advanced Lighting in Agents in composer, add a new Lighting Scene called whatever you need it to be then add the loads but don't set the levels then click the 'Get Lighting Levels' button next to the Add/Remove Loads button. That will pull in the lighting loads levels currently on the Lutron system so you can do a quick check and you're done