Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: Upgrading HomeWorks Interactive to HomeWorks Illuminations

  1. #1
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513

    Upgrading HomeWorks Interactive to HomeWorks Illuminations

    Upgrading a project from Interactive to Illuminations is a rather simple process. If more than one Interactive processor is used in this project, all processors will have to be replaced for Illuminations processors. If the same style Illuminations processor is obtained, simply swapping the processors will work and keep the system running. If the Interactive processor has an internal board (H48, D48, etc.) links 4 and 5 would have to be swapped when installing the Illuminations processor. The project file from the Interactive software will run in HomeWorks Illumination granted you make it a “.hdf” file. Interactive and Illuminations also have same integration protocol for third party control.

  2. #2
    Junior Member
    Join Date
    Mar 2019
    Posts
    4
    Armando, I have a system with a HWI-PM-120 (MI-H48) and an HRP-120. I want to swap out the HRP-120 with a HRP5-120. I opened my interactive file in illumination 1.33. After I switch the RF processor out and try to upload the file, it says that the older processor is not supported. What mistake am I making? I was under the understanding that I could have one older generation processor in my illumination project. I looked in the illumination software and all processors that you can choose are P5.

  3. #3
    Junior Member
    Join Date
    Mar 2019
    Posts
    4
    Additionally, Illumination automatically changed my wired processor to a P5 processor when I imported my interactive file.

  4. #4
    Hello!
    Upgrading HomeWorks Interactive to HomeWorks Illuminations is very simple but also takes a lot of time. You have to use variables to be able to upgrade, after handling Interactive you need to upgrade to a new level which is IIluminations. It takes a lot of time and use to be able to upgrade completely.

  5. #5
    Quote Originally Posted by BrandyNHopkins View Post
    Hello!
    Upgrading HomeWorks Interactive to HomeWorks Illuminations is very simple but also takes a lot of time. You have to use variables to be able to upgrade, after handling Interactive you need to upgrade to a new level which is IIluminations. It takes a lot of time and use to be able to upgrade completely.
    geometry dash subzero

Similar Threads

  1. Replies: 2
    Last Post: 12-11-2013, 04:29 PM
  2. HomeWorks Original Integration
    By Ty W. in forum 3rd-party Integration - Legacy HW
    Replies: 2
    Last Post: 08-26-2013, 09:52 AM
  3. HomeWorks Interactive Bridge
    By Ty W. in forum Design Assistance - Legacy HW
    Replies: 1
    Last Post: 07-30-2013, 12:11 PM
  4. HomeWorks QS RF troubleshoot
    By Craig W. in forum Troubleshooting - HWQS
    Replies: 0
    Last Post: 05-13-2013, 11:39 AM
  5. HomeWorks Illuminations RF toroubleshooting guide
    By Craig W. in forum Troubleshooting - Legacy HW
    Replies: 0
    Last Post: 05-08-2013, 04:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •