New Lutron Caseta dimmer not showing up in homekit

[MoogLe]

Hey guys
Have an existing lutron system with a bunch of switches already in homekit and everything works correctly.
Added a new diva dimmer today, works and added fine into the lutron app but its not carrying into homekit.
Saw some “solutions” that said to reset my bridge and re-add it. But wont that make me lose my entire setup having to redo all rooms and scenes? Is there really no way around this?
I tried checking for a “default” room in homekit and also checked in all rooms, cant find it. Also tried reinstalling the lutron app with no luck.
Hope someone has a solution

[Brandon W.]

Hello MoogLe and welcome to the forums!

Our apologies for this integration trouble. The Diva Smart dimmer is capable of adding to HomeKit, please try these steps to see if it will pull in:
- Perform an entire network reset by unplugging the Caseta Hub and your router from power for 30 seconds. Please plug the router in first, let it get online, then the Caseta Hub second.
- If you are using a AppleTV or HomePod, please power cycle this as well. Also, please ensure this is on the same network as your Caseta Hub!

The Caseta Hub has a dedicated HomeKit reset procedure. This will preserve everything that is programmed on your Lutron Hub (Devices, Scenes, and Schedules) but only break the link to HomeKit. This reset may be necessary to refresh everything. If the above steps do not help, please try the instructions in our knowledge article here: Removing Apple HomeKit integration from the Caseta System | Lutron

Once HomeKit has successfully unlinked, please add the integration back to your Caseta system by opening the Lutron app and tapping Settings> Integrations > Apple HomeKit.