Maestro Multi-Location with Sylvania Light

[boozmd12]

I have the Maestro Multi-Location Dimmer with 2 companion dimmers for our stairway. I am using the following light (https://www.homedepot.com/p/Sylvania...3469/327608103) at the top of our stairs and everything was working perfectly for about a month and now the Master Switch just blinks and I can't get the switch to turn on the main light, it only turns on the night light. It has a night light mode with one flip of the switch and if you turn it off and back on it will go to the main LED light. I tried using the compatibility site but didn't find the same light.

Any troubleshooting ideas?

[randyc]

It sounds like the device that switches between night light and day light has failed. You can try to double-tap the dimmer and see if the light goes to full on. Otherwise you will need to bypass the dimmer and see if the light works correctly.

[boozmd12]

It sounds like the device that switches between night light and day light has failed. You can try to double-tap the dimmer and see if the light goes to full on. Otherwise you will need to bypass the dimmer and see if the light works correctly.

It's weird, I reset the master switch and reprogrammed the dimmer settings and it seems to be working. But once you try to dim the light it gets all wonky and needs reset again. I'll go the manual again.

[randyc]

Weird is electronics middle name.

As a quick test, try adding a bulb without the day/night feature.

[boozmd12]

Weird is electronics middle name.

As a quick test, try adding a bulb without the day/night feature.

This is an all in one light with the LEDs built in to the fixture. I will take it done soon and put a cheapo one up to see what it does.