I have two rooms with the same type of ceiling fan, multi-speed with dimmable integrated light. In the first room, I can successfully control both the light and fan with a single Maestro MACL-LFQ combo switch. In the second room, I would like to control the fan with two separate switches, a Diva for the light, and a fan control (PD-FSQN) switch for the fan. It’s not working for me. Is this approach possible and I’m just wiring incorrectly? I currently have load wire going to each switch, ground to each, and neutral to the fan control. The Diva connects to the light, the fan control to the fan. I shouldn’t need the diva’s blue wire or a jumper wire as though this were a 3-way, right?
I’d greatly appreciate any help