Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: DVCL-153P Dimmer Switches with Halo recessed can lights problem

  1. #1
    Junior Member
    Join Date
    May 2024
    Posts
    1

    DVCL-153P Dimmer Switches with Halo recessed can lights problem

    My home was remodeled and converted to HALO recessed LEDs and Lutron DVCL-153P dimmer switches. Initially, when fully dimming a circuit, the lights on the string would not light at the same brightness. I adjusted the lever to achieve a consistent max dim, a level brighter at max dim than before. This solved the difference in brightness. Hooray! Then, when I would tun the switch off, while still selected to max dim on the switch, then turn the switch back on, only one of the lights would come on, the others stay off. Then, if I move the dimmer up, all the lights come on, then when I move the dimmer back to max dim the lights are on and consistent in brightness. I would like to avoid moving the adjustment lever to a brighter max dim setting if possible. Insights?
    Jim

  2. #2
    Lutron Technical Support
    Join Date
    Mar 2022
    Posts
    131
    Hello Calspikey. What is the exact model of the Halo lights you are using? I would like to see if we have tested these lights with our dimmers.

Similar Threads

  1. Using Dimmer DVCL-153P to Control a Fan
    By jwe54 in forum General Discussion - Controls
    Replies: 3
    Last Post: 05-24-2023, 01:42 PM
  2. Can a DVCL-153P switch control low voltage halogen lights?
    By lfvalente in forum General Discussion - Controls
    Replies: 1
    Last Post: 01-01-2022, 02:38 PM
  3. DVCL-153P lights flicker stop when dimmed
    By marcva in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 08-29-2020, 03:46 PM
  4. Replies: 3
    Last Post: 08-05-2020, 09:00 AM
  5. Replies: 6
    Last Post: 07-29-2019, 09:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •