Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Three PowPak Dimming Modules Stuck With Lights On

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    5

    Three PowPak Dimming Modules Stuck With Lights On

    I'm an electrician working for a large facility with 4 new buildings using Lutron lighting control throughout. Ever since the weekend before the lights in one large room have been stuck on full bright. There are three RMJS-8T-DV-B-EM Vive PowPak modules spread across two 277 volt lighting circuits and the buttons on all three have no effect.
    Do I suddenly have 3 bad modules or is something else going on here?

  2. #2
    Junior Member
    Join Date
    Apr 2019
    Posts
    5
    If it was just one PowPak module not working from its Pico controls and its manual switches not working either, I wouldn't hesitate to replace it, but 3 of them all going bad at the exact same time?
    I've done electrical work for over 50 years, but I have zero experience with this equipment, so I could really use someone's experienced opinion on this problem.
    Thank you, Rand

  3. #3
    Junior Member
    Join Date
    Apr 2019
    Posts
    5
    All three modules are quickly flashing two times with about a two second pause between each double flash.

  4. #4
    Lutron Technical Support
    Join Date
    Mar 2022
    Posts
    131
    Hello Rand. Do you know if there is a Vive hub present in this facility? It is possible that the hub is in emergency mode and is telling the PowPaks to stay at their emergency level (100%). Feel free to email systemsupport@lutron.com so we can start a case and look into this system in more depth.

Similar Threads

  1. Three PowPak Dimming Modules Stuck With Lights On
    By RandK in forum Troubleshooting - RA2
    Replies: 0
    Last Post: 04-19-2024, 02:35 PM
  2. Dimming LED picture lights with PowPak LMJ-5T-DV-B
    By jeffw in forum Design Assistance - HWQS
    Replies: 5
    Last Post: 06-16-2022, 01:07 PM
  3. Multiple Light Dimming with PowPak RMJS-8T-DV-B?
    By Beardog in forum General Discussion - Vive
    Replies: 2
    Last Post: 07-14-2018, 02:32 PM
  4. Mounting of DIN Rail Dimming/Switching Modules
    By oldguy in forum General Discussion - HWQS
    Replies: 1
    Last Post: 05-24-2016, 11:49 AM
  5. Phase control dimming PowPak
    By pscheetz in forum Design Assistance - Vive
    Replies: 2
    Last Post: 04-18-2016, 09:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •