I want to know how many Satco LED S12433 100W equivalent (13.5W) bulbs I can put on one Lutron LECL-153PH Dimmer switch. I have a chandelier that I want to put three of these bulbs in. The Lutron Switch is rated for LED150W, but I am unclear as to whether these are equivalent watts (100W in my case) or actual watts (13.5 in my case). I have read many conflicting opinions on this. Some people say you should use 10% of the dimmer rating, which would be only 15w. That doesn't seem right as i would only be able to run one 100W equiv bulb. I understand that LED's are a much more complicated topic than incandescent, with inrush currents and so forth. I have scoured many web sites and forums and cannot find a definitive answer. Any help would be appreciated.