Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: LED Light Strings

  1. #1
    Junior Member
    Join Date
    Apr 2024
    Posts
    1

    LED Light Strings

    I work for a company wanting to use LED light strings across an event venue. We purchased a string of 200 9W dimmable LEDs expecting to segment the bulbs into 400W or less segments......only to discover the practical limit of 250W on a Lutron dimmer. The company wants to control the eventual segments remotely due to stone construction not being amenable to switch boxes.
    So.....I need advice as to how to effectively control six string segments preferably on a single remote......in the simplest and least expensive manner possible. Can this work? I keep looking for an integration guide that covers my case to no avail.
    The bulb mfg does list Caseta as being tested successfully for their bulbs.....though Lutron does not list them as compatible (or tested). This is an outdoor setting however all the wiring is under cover.

  2. #2
    Lutron Technical Support
    Join Date
    May 2023
    Posts
    150
    Hello foxch0844 and welcome to the forums!

    We will be happy to provide the most effective solution for these LED string lights. Alongside remote control, were you interested in any form of app control (such as integrating these into a Caseta, Radio RA, or HomeWorks system)? Do you also have the model number of the bulbs that are included in these LED string lights?

Similar Threads

  1. Replies: 2
    Last Post: 12-05-2023, 01:41 PM
  2. MACL-LFQH-WH-C bottom three leds on light switch flashing no light or fan contriol
    By Andrewmcnair78 in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 12-12-2022, 03:53 PM
  3. Problem With Commercial Electric Can Light with Night Light
    By de_cas in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 04-22-2021, 08:11 AM
  4. Replacing light fixture with light/fan combination.
    By djhill in forum General Discussion - CAS
    Replies: 1
    Last Post: 11-03-2019, 11:02 PM
  5. What switches work with light fixtures that take MR16 light bulbs?
    By geofry in forum Design Assistance - RA2
    Replies: 3
    Last Post: 10-19-2019, 01:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •