Switch and Sensor seem to not work when cold

[scottrof]

I'm not sure of the exact model, i will need to look at the device to determine that, it's some version of MS-OPS, just a sensor and switch, no dimmer functionality.

Most mornings the light will not turn on, neither the sensor nor the push button switch will cause it to come on. I live in california, and it does not reach freezing temps where I live but it can get down in to the 40's or 50's in my garage over night.

Has anyone else had this issue?

[Will L.]

Hello,

Thank you for reaching out. The normal operating temp range is from 32F-104F and recommended for indoor use only. If the temperature has dipped in the space, it could have an effect on functionality.

Here is a link to a spec sheet for the MS-OPS line of products:

https://assets.lutron.com/a/documents/369666.pdf