Rollback Programming

[electricrussell]

Trying to program a rollback (?) function on SeeTouch keypads.

Situation is: I want to program a bathroom keypad to turn exhaust vent on (8ANS) with a scene toggle. When the button is pressed again I want the light(s) in the scene to go off, but, the vent to remain on for 15 minutes.
I am accomplishing this with a pico in another bathroom by setting the delay to "0" for the lights, and "900s" for the vent on the Off button.
Any ideas? I believe this was called rollback on the Ra2 software, but, admittedly cant remember.
Thanks!

[Rowdy R.]

Hey there,

Rollback feature does exist in Ra3 and will be found in Program under occupancy.
Please note you would be setting the timeout rule for anything you have selected so keep that in mind.