Hello all,
I've read several posts here in the forum that suggest it's possible to get a pool pump set up with a Caseta switch but I haven't quite figured out how to accomplish this my self. Hoping I can get a pro to give me a little guidance on this.
My pump is a Pentair Whisperflo 1HP pump | Model: 015583
My Caseta switch is a PD-WS-DV-WH
My system currently has a Packard C230C Contactor with one of the coil legs connected to a standard toggle switch which turns the pump on/off.
I thought this might be pretty straight forward given that I was replacing a dumb switch for a smart switch but unfortunately the Caseta seems to be challenged by the load and won't turn off unless I pull the tab at the bottom. The Caseta just keeps turning off/on until I pull out the tab. I know just enough to get my hands dirty but this is a little bit above my head. Hoping someone might know if my current configuration can be made to work or if I need to purchase alternative hardware.
Thanks in advance for any advice!