Hi guys,
I have about 10 lutron diva dimmers installed at home and they all work fine except the one in the kitchen.
Model: DVRF-PKG1D-WH-RC
Link: https://www.homedepot.ca/product/lut...821876#reviews
It's a 3-way switch which I used a pico remote in one and diva dimmer in the other.
It is located in a 2 gang box where one switch goes to the dining and the other to the kitchen
The kitchen switch powers 4 bulbs (2 sets of each in the kitchen) and I'm using these for them.
Link: https://www.homedepot.ca/product/phi...ack/1001663118
I tried adjusting the high end trim and that's not doing anything, it's already at max brightness.
I tried it with a different caseta dimmer switch and same issue, so I don't think the switch itself is faulty. Tried different bulbs of the above brand, same issue. Tried removing 3 of the 4 to see if it's a wattage issue but no dice.
When I try a different brand bulb, it's noticeably much brighter as it should be but it makes a humming sound, which is the reason I went and bought the above 'premium' bulbs.
I had the older bulbs on a non-smart non-dimmer switch and they're perfectly bright.
The new bulbs are very dim that I can notice small flickering when installed as well.
Would someone be able to tell me what the issue is?
Thank you!