Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: RadioRa 2 stop working issue

  1. #1

    RadioRa 2 stop working issue

    Hello,
    A few days ago my system stopped working. In diagnostics the repeater couldn't see any devices.


    So I reset the system, reset the devices, deleted the serials/activation and started over. The repeater still can't see devices to activate. So I brought my repeater from home and still have the same issue.
    I've never seen this problem before. How can I solve it?

  2. #2
    Hope that someone can guide me to fix this issue

  3. #3
    Junior Member
    Join Date
    Dec 2022
    Posts
    28
    Hello,

    Have you tried activating the Main Repeater and a device in a new project file? There may be an issue with the existing file that is preventing the devices from being seen.
    If you continue to have issues please call into our 24/7 technical support line. 1-888-Lutron1(588-7661)

    We hope this helps!

  4. #4
    Junior Member
    Join Date
    Nov 2019
    Posts
    19
    If I'm reading what you're asking correctly, neither repeater is seeing your installed devices to allow you to activate them. If they've previously been activated to a repeater they have to be reset before they can be activated to a new one (or the same one after a reset)

  5. #5
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,605
    RA2 diagnostics is a fairly slow program. Depending on the size of your system it could take a few minutes for it to update.

    I've seen a device or two go rogue and lose communication. Never an entire system though.

    As JCEnergy noted, you will need to do a full factory reset (triple tap, hold, triple tap) on the devices for the repeater to be able to see and activate them.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  6. #6
    Junior Member
    Join Date
    Jun 2024
    Posts
    2
    Quote Originally Posted by freddiebittle View Post
    Hello,
    A few days ago my system stopped working. In diagnostics the repeater couldn't see any devices.


    So I reset the system, reset the devices, deleted the serials/activation and started over. The repeater still can't see devices to activate. So I brought my repeater from home and still have the same issue.
    I've never seen this problem before. How can I solve it?
    Check if there are firmware updates for your repeater and other devices. Updating to the latest version may resolve compatibility issues. It happened to me!

Similar Threads

  1. Hunter Fan integration not working with RadioRA 3
    By ms570 in forum 3rd-party Integration - RA3
    Replies: 2
    Last Post: 05-08-2023, 10:44 AM
  2. RadioRA 2 Hybrid Keypad not working
    By jkaodmd in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 11-19-2018, 10:29 AM
  3. Open Stop Close Stop with Maintained CCO shades
    By Armando B. in forum Programming - HWQS
    Replies: 0
    Last Post: 04-01-2015, 12:38 PM
  4. Open Stop Close Stop with pulsed CCO shades.
    By Armando B. in forum Programming - HWQS
    Replies: 0
    Last Post: 11-05-2014, 11:04 AM
  5. Replies: 0
    Last Post: 07-11-2014, 02:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •