I'm replacing a MIR-1000M and its 3-way companion switch with a PD-5NE and Pico Remote. The box the PD-NE is going into also has a normal switch controlling some other lights. I'm having trouble figuring out the connections.
Attached are some photos and a diagram of what the connections look like right now with the MIR-1000M, which is working fine. The MIR-1000M is also connected to ground from all the wires coming int the box, the normal switch is not. The circuit has other devices on it as well.
The box for the companion switch being replaced by the Pico remote is the only thing in its box and has black, red, white and ground wires, all connected to the companion switch.
I've tried connecting the PD-5E the same way the MIR-1000M is connected, and the doing the wires in the other box where I'm removing the companion switch both with and without the white wire connected to the red and black wires. Neither has worked.
Hoping to get some guidance on what to try next. Thanks!