I have a lighting showroom. I have 2 alisse switches and a palladiom. All are activated along with the other devices. I have 8 ighting zones with multiple loads. Each load has multiple lights. See attached. I can't get the switches to activate any of the lights. The 3 switches consist of 9 buttons total. I would like each button to turn on/off each zone and one palladiom button to turn EVERYTHING on/off. I have RA3 cert. I was handed this Homeworks project and am piecing it together. The activity log shows the button press so the system sees it. But none of the lights turn on.