Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Lutron-Lutron Integration: QS <--> QSX Comms?

  1. #1
    Junior Member
    Join Date
    Aug 2016
    Posts
    16

    Question Lutron-Lutron Integration: QS <--> QSX Comms?

    Hi all,

    I've done a bit of searching on this and couldn't come up with much. We've run into a few cases where we are looking to upgrade systems from QS to QSX but can't do the whole systems at once due to size/scope/schedule/etc.

    What would be convenient in this case is to have a way for a QS system to integrate with a QSX system (i.e. send commands to the QSX system). I know QSX only supports LEAP officially, but is there anything special for QS that would allow this?

    Use cases are things like global (estate-wide) scenes.

    For the reverse: I know the QSX system can send telnet commands to the QS system. Is this the cleanest way of doing the integration between the two?
    And while this is possible, this is less useful for our use cases where we'll likely start with a small QSX presence.

  2. #2
    Senior Member
    Join Date
    Sep 2014
    Posts
    271
    Easiest way unfortunately to do this is to have a control system inthe middle like Crestron so you can router things back and forth between the two systems.

Similar Threads

  1. Lutron integration with Somfy
    By Matika D. in forum 3rd-party Integration - HWQS
    Replies: 0
    Last Post: 11-13-2020, 10:45 AM
  2. Lutron integration
    By Ed3021 in forum General Discussion - HWQS
    Replies: 1
    Last Post: 09-11-2019, 10:48 PM
  3. Lutron CoolMasterNet Integration
    By OmarHourani in forum 3rd-party Integration - HWQS
    Replies: 0
    Last Post: 12-13-2018, 02:10 AM
  4. CoolMasterNet Integration with Lutron HWQS
    By akurazz in forum 3rd-party Integration - HWQS
    Replies: 1
    Last Post: 01-31-2017, 09:29 AM
  5. Lutron and Control4 Integration
    By vwerke in forum 3rd-party Integration - HWQS
    Replies: 14
    Last Post: 06-10-2016, 08:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •