Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Unable to move Sivoia QS wireless from radiora2 to ra3

  1. #1
    Junior Member
    Join Date
    Jan 2024
    Posts
    1

    Question Unable to move Sivoia QS wireless from radiora2 to ra3

    Hi,

    I have 8 sets of shades in a house, and have been able to migrate most of them from a radiora2 to 3 setup.

    On one of the shades, I reset the shade by pressing the buttons for 4 seconds in order (from top to bottom). For all of the others, I reset the shades by resetting the RadioRA 2 controller.

    I was able to use lutron designer to pair (using wiggle) the other 7 shades. However, I have not been able to get the 8th shade to show up, regardless of how many times I reset it before. I've checked to ensure that the antenna is plugged in, and I've also tried to enter the assignment mode by pressing the open limit and then the right arrow button. The assignemnt mode works in the sense that it blinks every four seconds, but the shade still doesn't appear in the Designer software.

    Are there any other steps I can try to reset this shade or make them pairable? Thank you for your help!

  2. #2
    Lutron Technical Support
    Join Date
    May 2022
    Posts
    50
    Hi nyquist11, we would suggest that you confirm the reset actually went through on the shades drive. After the last step it should do a multi-color flash. You can view the steps to reset the drive on Page 16 of the programming guide: https://assets.lutron.com/a/document...de.pdf#page=16.

    It may also be helpful to completely remove the shade from the Design Tab in Lutron Designer and re-add it in. Lastly, ensure you are within the RF range of the shade.


    • RadioRA 2 / RA2 Select Devices: All Lutron Clear Connect-Type A devices must be within 30ft of the RadioRA 3 processor OR Repeater to assure proper communication.
      • Repeaters must be within 60ft of the Processor OR another repeater


      Feel free to contact our Lutron RadioRA Technical Support Team if you are needing any further assistance, you can reach us at 1-888-588-7661 and we are open 24/7.

Similar Threads

  1. RadioRA2 Essentials and Sivoia QS Wireless Roller Shades
    By briandilley in forum Programming - RA2
    Replies: 4
    Last Post: 12-20-2020, 08:31 PM
  2. Selling Sivoia QS Triathlon vs QS Sivoia Wireless
    By Carrie in forum General Discussion - Shades
    Replies: 3
    Last Post: 04-08-2019, 09:33 AM
  3. Mixing Sivoia QS Wireless with seeTouch QS Wireless and RA2 Select
    By supermarket in forum General Discussion - Shades
    Replies: 4
    Last Post: 03-07-2019, 02:39 PM
  4. Lutron App for Caseta Wireless and Sivoia QS Wireless Shades
    By oleggold in forum Programming - CAS
    Replies: 1
    Last Post: 11-05-2016, 11:43 PM
  5. Sivoia QED - 1 shade does not move, but the rest do.
    By Blair S. in forum Troubleshooting - Legacy QED
    Replies: 0
    Last Post: 07-25-2013, 05:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •