Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Multi gang switch compatibility

  1. #1
    Junior Member
    Join Date
    Dec 2023
    Posts
    1

    Multi gang switch compatibility

    I was upgrading one switch in a 4 gang box to a new caseta decora style switch and paired with a pico for remote use. The other three switches were Eaton decora single pole 15 amp switches. When I went to replace the cover I noticed the cassette switch sat 3/16" higher on the yoke then then the other three switches. This cause the cover plate not to fit over the switches.

    Has anyone experienced this, and is this a common problem when inter mixing brands? Or could I have possibly gotten a one off caseta switch that came off centered from the factory?

  2. #2
    Junior Member
    Join Date
    Jan 2024
    Posts
    2
    Quote Originally Posted by Dskel572 View Post
    I was upgrading one switch in a 4 gang box to a new caseta decora style switch and paired with a pico for remote use. The other three switches were Eaton decora single pole 15 amp switches. When I went to replace the cover I noticed the cassette switch sat 3/16" higher on the yoke then then the other three switches. This cause the cover plate not to fit over the switches.

    Has anyone experienced this, and is this a common problem when inter mixing brands? Or could I have possibly gotten a one off caseta switch that came off centered from the factory?
    Any updates?

  3. #3
    Junior Member
    Join Date
    Jan 2024
    Posts
    2
    :) :) :) ...

  4. #4
    Lutron Technical Support
    Join Date
    Jul 2023
    Posts
    26
    Hello,
    The design of the Smart Diva (DVRF-6L) was to fit the common decora wall plate opening. Dimension wise it is meant to fit 1.317" wide by 2.637" high. We would suggest taking photos of the unit in the wall with the cover off so the screws can be seen to our support@lutron.com email and our tech support agents would be able to assist you best that way.

Similar Threads

  1. Double gang box with 1 regular and 1 three way switch
    By Dano846 in forum General Discussion - CAS
    Replies: 1
    Last Post: 12-28-2019, 09:54 AM
  2. 3-way switch controlling multi-speed fan
    By Speckle in forum Design Assistance - Controls
    Replies: 1
    Last Post: 03-08-2019, 07:39 PM
  3. Multi locations with mechanical switch
    By kimballpc in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 06-11-2018, 10:22 AM
  4. Casetas Pro with Dumb Switch Paddle Same Gang
    By dhpeter in forum General Discussion - CAS
    Replies: 4
    Last Post: 11-09-2017, 04:48 PM
  5. Pico Dimmer Switch and Smart Switch in a multi-location setup
    By jbaude in forum General Discussion - CAS
    Replies: 1
    Last Post: 11-08-2017, 04:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •