Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: DVRF-6L Failure to control lighting at all

  1. #1
    Junior Member
    Join Date
    Nov 2023
    Posts
    1

    Question DVRF-6L Failure to control lighting at all

    Hi,

    I was excited to find a smart dimmer switch that doesn't require a neutral wire because my 1860 farm house doesn't have neutral wires.

    I followed the instructions for installing the DVRF-6L (which I bought as DVRFW-6L-WH-A) and flipped the circuit breaker on.

    The lights came on, but very dimly lit. The switch does absolutely nothing--won't turn them off, won't dim or increase the brightness.

    I've found nothing in the FAQs or forum posts about this. Any ideas?

    Thanks!

  2. #2
    Lutron Technical Support
    Join Date
    Jul 2023
    Posts
    16
    Hi Dogen,
    There are typically a couple things we would want to take a look at when that happens.
    What type of lights are you attempting to use. If LED see if you can get a Brand and a model number and then compare that to the Lutron LED compatibility page found here: LED Compatibility Tool | Lutron
    If you can get a hold of an older incandescent or halogen take of of the bulbs out and put that in to test that will usually clear things up too.

Similar Threads

  1. Palladium keypads can't control the lighting.
    By ElGavinoReal in forum Troubleshooting - HWQSX
    Replies: 1
    Last Post: 08-30-2023, 09:19 AM
  2. Control low voltage landscape lighting with Caseta?
    By mummer43 in forum General Discussion - CAS
    Replies: 9
    Last Post: 09-12-2022, 02:39 PM
  3. 2 dimmers + fan control intermittent failure
    By trasko in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 08-12-2021, 10:50 AM
  4. Any way to control dimming on 12V DC lighting?
    By jmacd2918 in forum General Discussion - CAS
    Replies: 8
    Last Post: 05-23-2021, 12:24 PM
  5. Kitchen Lighting Question - 3 Way Control
    By SAPDTID2565 in forum General Discussion - CAS
    Replies: 2
    Last Post: 10-08-2016, 11:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •