Thanks Thanks:  0
Likes Likes:  1
Results 1 to 3 of 3

Thread: App screen slider that can dim multiple devices together

  1. #1
    Junior Member
    Join Date
    Jan 2018
    Posts
    2

    App screen slider that can dim multiple devices together

    I would like to have dimming control over 3 PD-5NE devices from one virtual slider on an iOS device. Currently, that feature exists in the app for ONE device, but not multiple devices at once. Application is a large theater room with LED ceiling downlights fed by 3 PD-5NE devices. We have the need to manually dim all 3 devices together.

    I realize that I could install the 4-button PICO, and create 3 dim points. User could progressively hit each button in sequence, however, the resulting dim-stop, dim-stop, dim-stop sequence is not desirable, nor is just hitting a full down button, due to the non-configurable rate of dim.

    So, two possible solutions:

    - ability to manually dim multiple devices at once in the app
    OR
    - ability to set scene dimming rates

    Anybody else encountered this issue? Am I missing something?

  2. Likes domino liked this post
  3. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    499
    Cinequip, I'll forward your requests to our development engineers as possible future features to the app.
    Thank you for your suggestions.

    Alternately, you could install a standard PJ2-3BRL-GWH-L01 Pico remote, and link all 3 loads to it. You could then use the Raise/Lower arrows on the Pico in the app to brighten/dim all 3 loads at once.

  4. #3
    Junior Member
    Join Date
    Jan 2018
    Posts
    2
    Brian, Thanks for the quick reply. I am installing Picos for group control, however, we still would be interested in a virtual slider so you could manually dim a group together on the app.

    Thanks, again!

    -Scott

Similar Threads

  1. Setting % on Multiple Devices (e.g. scene)
    By jfine in forum 3rd-party Integration - RA2
    Replies: 0
    Last Post: 09-21-2017, 10:12 AM
  2. Multiple devices on serial bus RS232
    By dvpvic in forum 3rd-party Integration - RA2
    Replies: 3
    Last Post: 03-24-2017, 01:23 AM
  3. Multiple devices on serial bus RS232
    By dvpvic in forum General Discussion - RA2
    Replies: 0
    Last Post: 02-25-2017, 02:33 AM
  4. Support for multiple devices with Connect app?
    By wkearney99 in forum General Discussion - RA2
    Replies: 2
    Last Post: 05-06-2016, 09:13 PM
  5. Multiple iOS devices Homekit integration
    By TexasBuyer in forum Design Assistance - CAS
    Replies: 1
    Last Post: 08-23-2015, 10:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •