Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: "Unaffected" invisible in Level Editor

  1. #1
    Junior Member
    Join Date
    Oct 2013
    Posts
    25

    "Unaffected" invisible in Level Editor

    Something that comes up occasionally with customer scene editing that would be a useful addition - again, may be on a development to do list but thought I would put it out there

    If a zone is added to a button, the customer has to set a level for that zone using the level editor - in other words the customer cannot move zones in and out of control as they all have to be controlled, even if its off. It would be useful to add zones that the customer might want to change at some point in the future.

    E.g. Living room button may one day just control downlights, but another time the customer might want it to control downlights, pendant and wall lights as a scene - I have to go back and add these zones to allow this because if they are already assigned they would have to be set to off. If the customer could see and change zone states to/from "unaffected" this would be useful

    Just saying
    Last edited by LightBrigade; 10-14-2013 at 04:26 PM. Reason: typo

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Thank you for this feedback. We will forward this information on adding and removing loads from scenes in the Lutron Home Control+ app to our development team for consideration on a future release of the application.

Similar Threads

  1. BOM breakout in RA2 editor?
    By wkearney99 in forum Design Assistance - RA2
    Replies: 2
    Last Post: 10-08-2013, 07:15 PM
  2. dimmer not going back to last level
    By Craig W. in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 05-16-2013, 03:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •