I have 10 Triathlon Roller shades installed, powered with 2 conductor and wireless signal going through a hybrid repeater to our processor. I was able to activate them and adjust the open/close limits from within the tools section on Homeworks. The shades work both on the app and in conjunction with our control 4 system manually and on the schedule I created. The only problem is one shade is to fast and another too slow. When going into the Set Shade Speed (IHA) under tools, it allows me to click on each shade individually, see their current IHA settings, and move the shades up and down. From what I gather, to be able to change the IHA settings, I need to "Send Defaults to Shades". When I click this button, as all the other buttons are unclickable, after about 5-8 seconds I get an error message saying I am not connected to the shades. As I can open and close them from Homeworks before and after this error, I am confused how I am not connected.
Thanks,
JSWirecore