Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Primary Bath Switch Configuration

  1. #1
    Junior Member
    Join Date
    Sep 2023

    Primary Bath Switch Configuration

    I'm finishing up a primary bath renovation and am trying to figure out the best way to configure my switches. In a perfect world, I would be able to operate each of these separately:

    - 2 cans over the vanity + 1 over toilet
    - 2 cans over the shower
    - 2 lighted vanity mirrors
    - LED shower niche
    - LED toe kick (switch / motion?)
    - 1 vent fan

    Six switches on one wall seems excessive. I was hoping there would be a switch that could operate two lights separately, so I could consolidate some of these. Is there an easier way to do this that I'm not seeing?

    Any suggestions or advice is appreciated!

  2. #2
    Lutron Technical Support
    Join Date
    May 2023

    Thanks for your inquiry. Currently, we do not offer a stacked switch in the Caseta family. Our apologies for this. You are welcome to remotely install a PD-6ANS on these loads and install a PJ2-4B-GWH-L21 at the wall box location, please refer to your local electrical code.

    Click image for larger version. 

Name:	7yqxvjz8.png 
Views:	4 
Size:	31.6 KB 
ID:	1051

    Alternatively, relay or dimming PowPaks can be utilized. These will install in a standard 4 in x 4 in junction box. Please note, these will not pair to the Caseta system. These will only pair standalone with the above-mentioned Pico remote. For dimming line-voltage lights, please utilize the RMJS-PNE-DV. For on/off, we recommend the RMJS-5R-DV-B.

Similar Threads

  1. Ceiling Plan and Switch/Keypad configuration
    By Steve T in forum Design Assistance - RA2
    Replies: 4
    Last Post: 03-14-2020, 09:18 AM
  2. PD-5ANS ignoring mechanical switch in 3-way configuration
    By rofer in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 12-03-2019, 11:14 AM
  3. 4 way switch configuration
    By Bryanf in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 04-28-2019, 01:06 PM
  4. Replies: 8
    Last Post: 04-23-2019, 12:24 PM
  5. Caseta Dimmer 3-way configuration with manual toggle switch?
    By Spunky424 in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 01-19-2017, 09:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts