Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Best practice for controlling Somfy shades in Homeworks

  1. #1
    Junior Member
    Join Date
    Oct 2014
    Posts
    2

    Best practice for controlling Somfy shades in Homeworks

    I have a client that insists on using Somfy motors for his shades. I'm trying to discourage him by saying the integration will be easier by using Lutron Shades. What "Somfy components" are needed to make this work?

  2. #2
    Lutron Technical Support
    Join Date
    May 2013
    Posts
    639
    Homeworks can control 3rd party shades via contact closure outputs via the QSE-IO interface. You may want to try contacting Somfy to see if they have any other options.

  3. #3
    Junior Member
    Join Date
    May 2016
    Posts
    25

    Contact Closure VERSE DigiOne -- This Setup Works

    Quote Originally Posted by Brian W. View Post
    Homeworks can control 3rd party shades via contact closure outputs via the QSE-IO interface. You may want to try contacting Somfy to see if they have any other options.
    QS/QSX to Somfy using contact closures is easiest...if there are not a lot of motors becasue, one UTSI RF contact box requires a dry set for open, close, stop.

    Example: To control 3 zones of motors 3 URTSIs and 9 Lutron dry contacts are required.


    So, if a lot of zones then a DigiOne SP is the answer. The trick is in the connections and Digi settings.

    HOW TO:

    Use Lutron Integration Scenarios 2 and 4...with the following deviations

    DigOne Settings:

    Dip Switches All Down (OFF)
    Port profile:
    • "Serial Bridging"
    • Peer to Peer
    • IP use the Lutron processor address
    • Port = 2101


    Serial Settings:
    • Baud: 9600 None 8 None


    Advanced Network Settings:
    • Auto Auto
    • 30 60
    • 10 5
    • 30
    • Enable Keepalive
    • 0 1 0



    CONNECTION BETWEEN DigiOne and URTSI II
    • Standard LAN cable
    • Connect one end into URTSI
    • Cut other end off and get a Female RS232-RS485 Adapt. Connect as follows. (TRENDnet RS232 to RS422 RS485 Converter Adapter, Serial Port Data Converter, Black, TI-S100)
    • Ground: Brown-Brown/White
    • RXD-: Green/White
    • RXD+ Green


    Lutron:
    When adding the Ethernet Device set the port to 2101 and do not set up a user or password.

    This works.

Similar Threads

  1. Homeworks QS controlling Somfy Shades
    By acculite in forum 3rd-party Integration - HWQS
    Replies: 9
    Last Post: 11-09-2023, 11:54 AM
  2. Integrating Somfy RTS shades with Grafik Eye
    By jdcross0525 in forum General Discussion - HWQS
    Replies: 1
    Last Post: 08-14-2018, 01:26 PM
  3. Replies: 3
    Last Post: 05-18-2017, 12:57 AM
  4. Somfy shades and HWQS
    By Betsy in forum 3rd-party Integration - HWQS
    Replies: 1
    Last Post: 05-28-2015, 08:15 AM
  5. Controlling QS Wireless Shades thru a QSM in a Homeworks System
    By javanderlinde in forum General Discussion - HWQS
    Replies: 2
    Last Post: 10-04-2014, 10:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •