Hi,
I am using a DVCL-153PH dimmer to upgrade since I am using new bulbs. I set up the switch with the single pole. I attached the green wire to the ground, the black to the power and one of the reds to the light. The other red I closed off.
When the power is on, my voltage tester shows power in the black wire going into the switch. The red ones that aren't connected to the light have power. But as soon as I attached the red wire to the light, I have no longer gave any power coming out of the red wire (the unconnected wire does have power, but as soon as I switch them, I get the same result. No power to the light.
What am I doing wrong?