Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Changing PNL-8s to HWBP-8Ds

  1. #1
    Senior Member
    Join Date
    Sep 2013
    Posts
    424

    Changing PNL-8s to HWBP-8Ds

    Once load assignment is complete, is there a simple way to change PNL-8s to HWBP-8Ds in the QS design tab?
    This is not usual, and I have a project that will probably make this request any day now. I suppose I could keep the design as-is and simply order the correct panels, but I'd like the database to reflect reality. Do I have to re-assign the loads in new panels?

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Unfortunately, the panels cannot be changed in the software once defined. If you need to change to a breaker panel, the old panel would need to be deleted and the loads would have to be re-assigned to the new panel. The loads will not be deleted, just unassigned.

Similar Threads

  1. changing colors
    By Craig W. in forum Design Assistance - HWQS
    Replies: 3
    Last Post: 05-22-2013, 05:02 PM
  2. Changing device colors
    By Craig W. in forum Design Assistance - RA2
    Replies: 1
    Last Post: 05-16-2013, 05:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •