Occupancy Sensor Questions

[JeffreySkalny]

Is there any benefit in adding an LOS-CDT-1000R Occupancy Sensor to a project and then assigning it as an occupancy sensor as opposed to just wiring it to a CCI and programming it in the CCI?

If there is, is there any way to use the CCI on an Illumination Keypad for this function?

What occupancy sensors are able to be used on the QS RF Link?

Thank you,
Jeff

[Kevin P.]

Is there any benefit in adding an LOS-CDT-1000R Occupancy Sensor to a project and then assigning it as an occupancy sensor as opposed to just wiring it to a CCI and programming it in the CCI?

If there is, is there any way to use the CCI on an Illumination Keypad for this function?

What occupancy sensors are able to be used on the QS RF Link?

Thank you,
Jeff

Dear Jeff,

Thank you for the inquiry.

Adding a sensor to an QSE-IO input allows you to program this under the Occupancy tab. The occupancy tab allows for additional timeout and different options when programming conditionals. You can reference the sensor state as occupied or unoccupied.

The LRF2 sensors are used on the QS RF link. Example, LRF2-OCR2B-P-WH is the ceiling mount sensors. We also have wall, corner, and hallway mounts.