Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Roller 300 for Heavy Roman Shade

  1. #1

    Roller 300 for Heavy Roman Shade

    Need to do a heavy 42 Lbs roman shade and Lutron Roller 150 is only up to 23. We can't split the shades since it is supposed to be a blackout and it is facing the TV. Any of you guys used the Roller 300 for romans? Curious as to why Lutron doesn't offer it as a Roman Kit.

  2. #2
    Lutron Technical Support
    Join Date
    May 2013
    Sorry for the delay. According to our engineers, the R300 is too powerful for Roman shades. It has the ability to damage or break the shade if it gets stuck. We don't suggest anything higher than a R150 because the amount of force the drive can generate when stalled gets close to how much force it takes to break the components for Romans.

Similar Threads

  1. Lutron Sivoia shade not showing power on the roller and control keypad
    By micky1121 in forum General Discussion - Shades
    Replies: 7
    Last Post: 05-08-2023, 09:37 AM
  2. Roller Shade for Tilt and Turn windows?
    By krassyg in forum Design Assistance - Shades
    Replies: 5
    Last Post: 10-15-2022, 03:02 PM
  3. Heavy UDP Traffic
    By jkvossen in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 10-05-2017, 11:47 AM
  4. Ceiling mounted Roller shade?
    By veeeh in forum Design Assistance - Shades
    Replies: 3
    Last Post: 04-13-2015, 02:41 PM
  5. 3rd-party via NWK to control Lutron Sivoia QS Roller Shade
    By hkfiresoul in forum 3rd-party Integration - HWQS
    Replies: 1
    Last Post: 04-15-2014, 01:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts