Is there a way to have QS processors use NIST time based on the location set in the project details? If not, does the SmartBridge Pro add this feature?
Jeff
Is there a way to have QS processors use NIST time based on the location set in the project details? If not, does the SmartBridge Pro add this feature?
Jeff
Dear Jeff,
Thank you for the inquiry.
Currently the processor will only get time from the computer that transfers to the system or by changing in a telnet session.
The Smart Bridge does get time from NTP servers. When the Smart Bridge is setup the mobile device will send the Smart Bridge the location information. The Smart Bridge will use this location and the information from the NTP pool to determine the correct time.
Dear Jeff,
The Lutron Smart Bridge will not communicate with the HomeWorks QS system.
I think you might be referring to the Lutron Connect Bridge. Part of the spec for the Lutron Connect Bridge is timeclock sync. This will update the QS processors to ensure the correct time is being kept. http://www.lutron.com/TechnicalDocum...ect_Bridge.pdf