Hello, I am wanting to purchase some lighting controls and am not sure what I need to select. I will outline my scenario below. I hope i posted this in the right forum.
Currently-
On one circuit, three traditional can lights accent a fireplace and one can light in the corner of the room accents a corner cabinet. Controlled by a Lutron dimmable wired switch (dv600p)
Fan in the middle of the room, wired directly from panel. Controlled by a wireless remote.
Goal-
1. Leave current 4 traditional can lights, perhaps replace bulbs with LED’s
2. Replace fan with a light fan combo. Control the light from the wall with a wireless switch. (I don’t mind pulling the chain on the fan to operate the fan if I have to)
3. Add 6 LED can lights to the room. They will be on a separate dimmable wireless switch. (probably put a junction box in the attic and use the wire that is coming to the fan currently. The fan/light combo and 6 new cans will be wired from the same source wire but switched differently.)
4. End up with three dimmable switches (controlling existing cans, new fan/light, and new cans) at the same location and ideally have them all look the same.
What do I need to buy from Lutron the make my plan work? (I need wireless switches for the added lights because it would be extremely difficult to get a wire fished down the wall to the new switches.)
Thank you!
wpeters