I'm hoping someone can help me with the wiring of a 4-way switch. I believe I followed the instructions correctly. I installed the Caseta switch in the 4-way location and the two 3-way switches work properly but the smart switch doesn't operate.
I attached the two red wires to the blue on the Casita switch. attached the neutral. grounded etc. In the 3-way locations I attached the common to the not-red wire and both of them to the odd colored screw as instructed. the 2 3-way switches work but that's it. Switched the black and red wires on the Claro and nothing worked so I switched them back. The light on the Claro turns on and off but it doesn't operate the lights.
I'm out of options.
Thanks in advance for any help.