I purchased a Home Decorators ceiling fan that only operates with a remote. I tried to bypass the receiver and wire the fan motor into a Lutron AYFSQ-F-WH but the switch did not seem to drop speed of the motor from what I could tell. I have confirmed that the motor is AC and the receiver box inside the fan has a sticker that says "5uf + 6uf", which I assume are the cap values for lowering the fan speed. The cap values in the Lutron AYFSQ-F-WH are listed as 4.7K and 9K. I have read that cap values need to be exact to work. Disregarding any sort of warranty on the switch or the fan, if I were to swap the caps from the receiver with the ones in the Lutron switch, is it at all possible that it would work or would there be more than just the capacitors needed to drop the fan speed?