Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Pico switches for RA2 select system

  1. #1
    Junior Member
    Join Date
    Apr 2023
    Posts
    1

    Pico switches for RA2 select system

    Hello.

    I'm relatively new to installing a home automation system and i believe that RA2 select is a different product range from RadioRA2, but i could not find the right thread for RA2 select, so decided to post here. Please redirect me if i should be asking my question elesewhere.

    I'm currently designing the RA2 select system for my villa and have procured most of the relays, dimmers, hubs, switches etc. I am falling short of a few 4 button switches. The ones i previously got were PK2-4B-TAW-P02. Now I'm looking for PK2-TAW-4B-L31. But every all i can find is PJ2-4B-GWH-L31. Although they look the same, I'm not sure if one can be used instead of the other. Can I buy PJ2-4B-GWH-L31 be used instead of PK2-4B-TAW-P02?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    No. The J models uses 434 MHz frequencies. They are primarily intended for North America. The K models use 868 MHz which I think is the rest of the world. There are some other codes. You are going to need the K model if that is what is designated for your country.

    No pics of the villa??
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Are all switches 3-way switches if you have a Pico remote?
    By im.djl in forum General Discussion - CAS
    Replies: 2
    Last Post: 03-08-2021, 01:56 AM
  2. How to select matching Maestro Dimmers and Switches?
    By LadyofLA in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 11-01-2020, 08:31 PM
  3. Porting Select system to RA2
    By PAR-Designer in forum Best Practices - RA2
    Replies: 4
    Last Post: 12-27-2019, 06:08 PM
  4. Can you use a RA2 Select repeater with a RadioRa2 System?
    By danielblock in forum General Discussion - RA2
    Replies: 1
    Last Post: 08-19-2018, 01:26 PM
  5. Dimmers for CSL Downlight using RA2 select system
    By topiary in forum Design Assistance - RA2
    Replies: 0
    Last Post: 05-16-2018, 03:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •