Thanks Thanks:  0
Likes Likes:  1
Results 1 to 5 of 5

Thread: RF module 0-10v and RR-PROC3

  1. #1
    Junior Member
    Join Date
    Feb 2023
    Posts
    28

    RF module 0-10v and RR-PROC3

    Can I control an RF module (0-10V) tipe A directly with a RR-PROC3 processor or do I need a repeater to achieve it?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    You can control it directly. The RA3 is a combination type A and type X repeater.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Feb 2023
    Posts
    28
    I am waiting for an order for the 0-10v moulder to be able to do the test, I have the processor, switch and dimmer sunnata.


    Thanks for your help

  4. Likes randyc liked this post
  5. #4
    Senior Member
    Join Date
    Dec 2013
    Posts
    579
    But of course it has to be within 30 feet of the processor. If it's longer distance you'd need to add repeater(s).

  6. #5
    Junior Member
    Join Date
    Feb 2023
    Posts
    28
    Thanks, I think I'm going to have to add another processor to this residency project, it's my first project with RadioRa 3.

Similar Threads

  1. factory reset an rr-proc3 processor
    By hrevete in forum Troubleshooting - RA3
    Replies: 2
    Last Post: 03-24-2023, 12:05 PM
  2. two RR-PROC3 processors in the same radioRA3 system
    By hrevete in forum Programming - RA3
    Replies: 2
    Last Post: 03-13-2023, 01:46 PM
  3. CAn the LMJ-5T-DV-B module dim non 0/10v loads?
    By AndyM in forum General Discussion - HWQS
    Replies: 2
    Last Post: 03-22-2019, 06:56 PM
  4. Replies: 1
    Last Post: 12-10-2014, 11:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •