Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: sunnata devices not detected in Lutron app

  1. #1
    Junior Member
    Join Date
    Feb 2023
    Posts
    28

    sunnata devices not detected in Lutron app

    Greetings, I have the following problem: I have a sunnata dimmer and a sunnata switch which I had already used in a project in the Lutron designer software and physically tested with correct operation, but then I created another new project file and when I use the app Lutron devices do not detect sunnata devices. How do I unlink the sunnata devices so that they are detected by the app again?

  2. #2
    Junior Member
    Join Date
    Dec 2022
    Posts
    23
    Hello,

    You will need to default your devices in order to app them into a new project.
    The RRST-PRO-N and the RRST-8ANS both default using the same process (TTH TTR).
    Tap three times and hold on the third tap, wait for the LED indicators to scroll up and down or flash, then tap three more times without holding.
    You should see the load turn off and on 3 times indicating the default was successful.

    We hope this sheds some light!

  3. #3
    Junior Member
    Join Date
    Feb 2023
    Posts
    28
    Thank you very much for your help, your instructions worked for me.

  4. #4
    Senior Member
    Join Date
    Sep 2014
    Posts
    269
    Why cant they make these able to be activated in the designer software like every other Lutron device? This is silly to have to use the app AND the software on a custom solution. This isnt entry level stuff like Caseta!

  5. #5
    Junior Member
    Join Date
    Jan 2023
    Posts
    12
    The only thing I can guess is that they figure it's easier to walk around with your iPad than a laptop to do the activations. In any case, walking through a house and activating 30 devices with the iPad doesn't take very long.

Similar Threads

  1. Anybody successfully activate Sunnata devices without internet?
    By SparkyCoog in forum General Discussion - RA3
    Replies: 9
    Last Post: 01-15-2024, 09:07 AM
  2. How to integrate Insteon Devices or control with Lutron Devices on an iPhone or iMac?
    By Andyhutch1947@gmail.com in forum Design Assistance - CAS
    Replies: 1
    Last Post: 07-23-2022, 12:11 PM
  3. Lutron Sunnata - use in 3-way applictions on both ends?
    By damsrq in forum Design Assistance - Controls
    Replies: 6
    Last Post: 12-26-2021, 10:19 AM
  4. Replies: 1
    Last Post: 07-02-2021, 06:27 PM
  5. Does a Lutron Sunnata work with a fixture using a 0-10v supply.
    By Gordie in forum General Discussion - Controls
    Replies: 1
    Last Post: 05-06-2020, 07:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •