-
Lutron Home Control+ android app
Just wondering what's the highest firmware/software (RadioRA2) version this app can support. Made a mistake of flashing my firmware to 12.10 (from 8.2) and now it's forcing me to buy a bridge in order to use the Lutron RA2+HWQS android app.
-
I'm not 100% sure but I think 12.10 is the version that killed it. Anything 12.9ish should work.
I am purposely keeping some customers below 12.10 because they don't need remote access.
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Thanks. I tried 12.0.1 and it works. I'll try 12.4 later and see if it still works. I guess I bit the bullet on that bridge a bit too early. Anyhow, might as well add it since it's already on the way.
-
The Lutron Home Control+ app was only compatible with Ra2 v6.0.0 through v12.0.1.
-
Originally Posted by
Brian W.
The Lutron Home Control+ app was only compatible with Ra2 v6.0.0 through v12.0.1.
I see. I'll stick with 12.0.1 then. Thanks.
-
Get LHC+ from apkmirror.com
FWIW, I have a Lenovo tablet running Android 12 and a Pixel 7a running Android 13. Google Play would not allow me to install "Lutron Home Control+" on either device, claiming it was only compatible with an earlier version of Android. I was able to install it by downloading the APK for "Lutron Home Control+" from apkmirror.com. The app works just fine with both these devices on my RA2 system that was installed 5 years ago. Guess I'll have to be careful not to upgrade the firmware.
The new (recommended) Lutron app is absolutely useless to me because I don't own (or need) their superfluous new Relay module.