In my latest project I’ve got RA3 Sunnata Hybrid keypads in each of the bedrooms. Those bedrooms have Minka Smart (Bond) ceiling fans with lights. I’ve programmed a button on the Lutron keypad to control the Minka light and another to control the fan. Those buttons do not control other Lutron loads. I’d like to find a way control the LED logic on the keypads so that when the fan light is on the LED for the associated button is on (and off when off).

Is there a way to control the LED logic for Lutron (RA3) keypads through Control4? I know from the Lutron Itegration Protocol that the LED logic for keypads can be set by a distinct command. I just don’t see a way to access that control in the Control4 Lutron driver.

Any guidance would be appreciated.