Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: RRD-PRO flashing

  1. #1
    Junior Member
    Join Date
    Mar 2021
    Posts
    15

    RRD-PRO flashing

    Hello, I have an RRD-PRO controlling 4- Element 6” Recessed 10.5 watt LED downlights. Worked great for about a year and today all 4 lights start flashing like a strobe about 2 seconds. It’s the light fixtures that are flashing not the indicator lights on the dimmer and they are pulsing steadily, not flickering. Is the dimmer dead/dying or what else may be the problem?
    I have 2 RD-RD remote dimmers in the circuit, 1 before and 1 after the RRD-PRO

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Generally neutral devices should be at the end where the wire goes up to the light.
    There are some cases where you don't need the neutral connection but I would connect it anyway. It doesn't hurt and sometimes eliminates situations like this.
    I'd try pulling the air gap and letting it set for a minute.
    It could also be the electronics in the LED. Try removing them one at a time and see if it cures the issue.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Flashing and hot.
    By Jcbaer in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 09-21-2020, 04:43 PM
  2. Flashing in iOS app only
    By Dalcombright in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 03-02-2019, 12:25 PM
  3. Flashing LED
    By PCH2OMAN in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 03-10-2016, 01:32 PM
  4. RRD-6CL Flashing When Off
    By schalliol in forum Troubleshooting - RA2
    Replies: 7
    Last Post: 02-22-2016, 05:08 PM
  5. rythmic flashing
    By Mattsscc in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 03-10-2015, 10:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •