Hi All - Finally picked Lutron Caseta and trying to do my first Caseta smart switch. It's the simple two button on/off (PD-6ANS-WH) two-way switch.
I opened the existing switch and found the following:
1 x Hot (White)
2 x Load (White)
3 x Ground (Copper)
3 x Hot (Black)
Here's where it's tricky ... and I've swapped a lot of light switches before today ... the blacks are tied together like the neutrals usually would be and the hot wire is white. Obviously not to be straight forward throwing in the smart switch because no neutral. What do I do in this situation?
Easy choice might be to just go with DVRFW-6L-WH-A, which doesn't require a neutral? Thought I'd ask before buying this one as it's ~$20 more than the aforementioned version. Thanks in advance for any help!