Hello everyone!
First time PD-FSQN installation. Also new fan installation (AC motor model with no light fixture). New switch box has two 14/2 lines coming in, one from the house and one from the fan.
Everything looks good, but when turning the circuit on I get no action from the fan controller. No lights, no fan movement.
Ive tripled checked the wiring to the switch:
- Switch green to ground from both incoming lines
- Hot (black) line from fan attached to screw terminal on fan controller
- Switch white to both neutrals
- Switch yellow to load (black) coming from house line
With switch out of the wall and circuit hot I can confirm the switch yellow and white are hot with electricity, confirmed by my tester. So I have power to the switch.
What am I missing? I realize its also a new fan and its possible the fan is DOA - but I would have expected at least a light on the PD-FSQN. Ideas?
Thanks everyone - Mark